You're viewing a previously published revision of this guide.  View latest revision

Older
Dec 15, 2021 - 01:12:38
Feb 13, 2022 - 12:02:03 Jan 22, 2022 - 07:01:09 Dec 28, 2021 - 11:12:46 Dec 25, 2021 - 06:12:47 Dec 25, 2021 - 04:12:11 Dec 16, 2021 - 09:12:59 Dec 15, 2021 - 05:12:25 Dec 15, 2021 - 04:12:19 Dec 15, 2021 - 04:12:19 Dec 15, 2021 - 03:12:26 Dec 15, 2021 - 02:12:35 Dec 15, 2021 - 02:12:28 Dec 15, 2021 - 02:12:54 Dec 15, 2021 - 01:12:38 Dec 14, 2021 - 09:12:10 Dec 14, 2021 - 09:12:32 Dec 14, 2021 - 08:12:51 Dec 14, 2021 - 08:12:44 Dec 14, 2021 - 08:12:18
Newer

02. Z-Axis Motor Assembly

Written By: Simon Davie (and one other contributor)
  • Comments: 1
  • Favorites: 0
  • Completions: 20

Steps

2

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Quiz

0

  1. z_motor_cage printed part

    • z_motor_cage printed part

    • 4x M6x12 Cap Head Screw

    • 4x 3030 Drop-in T-Nut - M6

  2. z_motor_cage printed part 2x M6x12 Cap Head Screw 2x 3030 Drop-in T-Nut - M6

    • z_motor_cage printed part

    • 2x M6x12 Cap Head Screw

    • 2x 3030 Drop-in T-Nut - M6

    • Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point.

    • Position the Z-axis motor mount as shown. The base should rest on the rear feet

    • Fasten both M6x12 screws to secure the mount to the frame

    • Take care not to over tighten the M6x12 screws as you can damage the printed part.

Author

with 1 other contributor

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 6

Past 7 Days: 14

Past 30 Days: 126

All Time: 13,576