You're viewing a previously published revision of this guide.  View latest revision

Older
Mar 13, 2025 - 07:03:13
Mar 28, 2025 - 09:03:31 Mar 28, 2025 - 09:03:29 Mar 28, 2025 - 09:03:40 Mar 21, 2025 - 07:03:02 Mar 21, 2025 - 07:03:58 Mar 21, 2025 - 07:03:14 Mar 21, 2025 - 07:03:02 Mar 21, 2025 - 06:03:28 Mar 19, 2025 - 04:03:00 Mar 19, 2025 - 04:03:43 Mar 17, 2025 - 08:03:20 Mar 17, 2025 - 08:03:14 Mar 17, 2025 - 08:03:36 Mar 17, 2025 - 07:03:51 Mar 17, 2025 - 07:03:38 Mar 17, 2025 - 07:03:48 Mar 17, 2025 - 07:03:36 Mar 17, 2025 - 07:03:49 Mar 17, 2025 - 05:03:33 Mar 17, 2025 - 05:03:09 Mar 13, 2025 - 10:03:05 Mar 13, 2025 - 09:03:10 Mar 13, 2025 - 09:03:12 Mar 13, 2025 - 09:03:00 Mar 13, 2025 - 09:03:40 Mar 13, 2025 - 08:03:05 Mar 13, 2025 - 08:03:08 Mar 13, 2025 - 08:03:59 Mar 13, 2025 - 08:03:57 Mar 13, 2025 - 08:03:00 Mar 13, 2025 - 08:03:36 Mar 13, 2025 - 08:03:06 Mar 13, 2025 - 08:03:29 Mar 13, 2025 - 08:03:36 Mar 13, 2025 - 07:03:04 Mar 13, 2025 - 07:03:58 Mar 13, 2025 - 07:03:07 Mar 13, 2025 - 07:03:16 Mar 13, 2025 - 07:03:54 Mar 13, 2025 - 07:03:14 Mar 13, 2025 - 07:03:04 Mar 13, 2025 - 07:03:07 Mar 13, 2025 - 07:03:40 Mar 13, 2025 - 07:03:08 Mar 13, 2025 - 07:03:22 Mar 13, 2025 - 07:03:54 Mar 13, 2025 - 07:03:11 Mar 13, 2025 - 07:03:35 Mar 13, 2025 - 07:03:54 Mar 13, 2025 - 07:03:13 Mar 13, 2025 - 06:03:10
Newer

02. Common components

Written By: Rat Rig
  • Comments: 0
  • Favorites: 0

Steps

1

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. 120mm - 16AWG RED (A-Fork, B-Fork) (4) Insert wire (4) in the 13NO terminal on the contactor and connect it to the A1 terminal of the contactor. After insertion, attempt to pull the wire to verify that it is securely attached.

    • 120mm - 16AWG RED (A-Fork, B-Fork) (4)

    • Insert wire (4) in the 13NO terminal on the contactor and connect it to the A1 terminal of the contactor.

    • After insertion, attempt to pull the wire to verify that it is securely attached.

    • 800mm - 16AWG RED (A-Fork, B-Ferrule) (5)

    • Insert wire (5) in the 5/L3 terminal on the contactor and connect it to the +24V Red PTFix block.

Author

Rat Rig

Member since: 7/10/20

48,550 Reputation

105 Guides authored

View Statistics:

Past 24 Hours: 20

Past 7 Days: 126

Past 30 Days: 656

All Time: 6,894