You're viewing a previously published revision of this guide. View latest revision

Oct 25, 2022 - 10:10:51

Jul 29, 2023 - 11:07:59 Jul 29, 2023 - 11:07:34 Oct 28, 2022 - 07:10:28 Oct 28, 2022 - 05:10:49 Oct 28, 2022 - 04:10:43 Oct 28, 2022 - 04:10:40 Oct 27, 2022 - 02:10:20 Oct 27, 2022 - 02:10:19 Oct 27, 2022 - 02:10:17 Oct 27, 2022 - 01:10:31 Oct 27, 2022 - 01:10:11 Oct 26, 2022 - 08:10:36 Oct 25, 2022 - 10:10:26 Oct 25, 2022 - 10:10:47 Oct 25, 2022 - 10:10:38 Oct 25, 2022 - 10:10:27 Oct 25, 2022 - 10:10:11 Oct 25, 2022 - 10:10:02 Oct 25, 2022 - 10:10:54 Oct 25, 2022 - 10:10:43 Oct 25, 2022 - 10:10:24 Oct 25, 2022 - 10:10:52 Oct 25, 2022 - 10:10:40 Oct 25, 2022 - 10:10:31 Oct 25, 2022 - 10:10:21 Oct 25, 2022 - 10:10:54 Oct 25, 2022 - 10:10:44 Oct 25, 2022 - 10:10:30 Oct 25, 2022 - 10:10:16 Oct 25, 2022 - 10:10:31 Oct 25, 2022 - 10:10:05 Oct 25, 2022 - 10:10:55 Oct 25, 2022 - 10:10:57 Oct 25, 2022 - 10:10:51 Oct 25, 2022 - 10:10:05 Oct 25, 2022 - 10:10:14 Oct 25, 2022 - 10:10:54 Oct 25, 2022 - 10:10:25 Oct 25, 2022 - 10:10:55 Oct 25, 2022 - 10:10:49 Oct 25, 2022 - 10:10:51 Oct 25, 2022 - 10:10:31 Oct 25, 2022 - 10:10:51 Oct 25, 2022 - 10:10:27 Oct 25, 2022 - 10:10:49

Newer

04. CoreXY Idler Assemblies

Written By: Simon Davie (and 2 other contributors)

Comments: 6
Favorites: 0
Completions: 19

Steps

Step 1 Prepare the lower CoreXY idler parts

Insert wisdom here.

Step 2 Assemble the lower CoreXY idlers

M6x12 Cap Head Screw
y_min_bumper printed part
idler_plate_enclosure_2.0 plate
3030 Drop-in T-Nut - M6
Loosely thread a 3030 T-Nut onto each of the M6x12 screws. Do not tighten them at this point
Pay attention to the different orientation of the idler plates
Set these assemblies aside until Steps XX & XX