You're viewing a previously published revision of this guide.  View latest revision

Older
Oct 25, 2022 - 10:10:49
Jul 29, 2023 - 11:07:59 Jul 29, 2023 - 11:07:34 Oct 28, 2022 - 07:10:28 Oct 28, 2022 - 05:10:49 Oct 28, 2022 - 04:10:43 Oct 28, 2022 - 04:10:40 Oct 27, 2022 - 02:10:20 Oct 27, 2022 - 02:10:19 Oct 27, 2022 - 02:10:17 Oct 27, 2022 - 01:10:31 Oct 27, 2022 - 01:10:11 Oct 26, 2022 - 08:10:36 Oct 25, 2022 - 10:10:26 Oct 25, 2022 - 10:10:47 Oct 25, 2022 - 10:10:38 Oct 25, 2022 - 10:10:27 Oct 25, 2022 - 10:10:11 Oct 25, 2022 - 10:10:02 Oct 25, 2022 - 10:10:54 Oct 25, 2022 - 10:10:43 Oct 25, 2022 - 10:10:24 Oct 25, 2022 - 10:10:52 Oct 25, 2022 - 10:10:40 Oct 25, 2022 - 10:10:31 Oct 25, 2022 - 10:10:21 Oct 25, 2022 - 10:10:54 Oct 25, 2022 - 10:10:44 Oct 25, 2022 - 10:10:30 Oct 25, 2022 - 10:10:16 Oct 25, 2022 - 10:10:31 Oct 25, 2022 - 10:10:05 Oct 25, 2022 - 10:10:55 Oct 25, 2022 - 10:10:57 Oct 25, 2022 - 10:10:51 Oct 25, 2022 - 10:10:05 Oct 25, 2022 - 10:10:14 Oct 25, 2022 - 10:10:54 Oct 25, 2022 - 10:10:25 Oct 25, 2022 - 10:10:55 Oct 25, 2022 - 10:10:49 Oct 25, 2022 - 10:10:51 Oct 25, 2022 - 10:10:31 Oct 25, 2022 - 10:10:51 Oct 25, 2022 - 10:10:27 Oct 25, 2022 - 10:10:49
Newer

04. CoreXY Idler Assemblies

Written By: Simon Davie (and 2 other contributors)
  • Comments: 6
  • Favorites: 0
  • Completions: 19

Steps

3

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  2. M6x12 Cap Head Screw y_min_bumper printed part idler_plate_enclosure_2.0 plate

    • M6x12 Cap Head Screw

    • y_min_bumper printed part

    • idler_plate_enclosure_2.0 plate

    • 3030 Drop-in T-Nut - M6

    • Loosely thread a 3030 T-Nut onto each of the M6x12 screws. Do not tighten them at this point

    • Pay attention to the different orientation of the idler plates

    • Set these assemblies aside until Steps XX & XX

  3. M6x12 Cap Head Screw idler_plate_enclosure_2.0 plate 3030 Drop-in T-Nut - M6

    • M6x12 Cap Head Screw

    • idler_plate_enclosure_2.0 plate

    • 3030 Drop-in T-Nut - M6

    • Loosely thread a 3030 T-Nut onto each of the M6x12 screws. Do not tighten them at this point

    • Pay attention to the different orientation of the idler plates

    • Set these assemblies aside until Steps XX & XX

Author

with 2 other contributors

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 17

Past 7 Days: 113

Past 30 Days: 453

All Time: 18,507