Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer

Introduction

This guide provides a thorough overview of the disassembly of the EVA3, the preparation of the V-Core 3.1 frame, and the installation procedure for the Rat Rig toolhead V1.0 Upgrade Kit.

The Rat Rig Toolheads are streamlined to be used specifically with our favourite combination:

Orbiter V2

Phaetus Rapido UHF hot end

4028 part cooling fan

Rat Rig “SuperPinda” Probe by P&F

    • This guide is divided into 3 parts, to help you quickly find the instructions you need:

    • Disassembling the EVA 3.0

    • Preparing the V-Core 3.1 for the upgrade kit

    • Installing the Rat Rig toolhead v1.0 upgrade kit

  1. Remove the M3x25 Cap Head Screw Remove the Hex Nut - M3 Remove the M3 Nylon Locking Hex Nut
    • Remove the M3x25 Cap Head Screw

    • Remove the Hex Nut - M3

    • Remove the M3 Nylon Locking Hex Nut

    • Remove the M3x35 Cap Head Screw

    • Remove the 40mm_fan_duct assembly as shown

Rat Rig

Member since: 7/10/20

48,601 Reputation

105 Guides authored

View Statistics:

Past 24 Hours: 14

Past 7 Days: 97

Past 30 Days: 517

All Time: 20,586