Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer

Introduction

Please note: The lead screw measurements provided in this guide are based upon building a 300x300 V-Core 3.

If you are building a machine of a different size, please refer to the following list for the correct lead screw length for your machine:

  • 200x200: 3x 280mm lead screws
  • 300x300: 3x 380mm lead screws
  • 400x400: 3x 480mm lead screws
  • 500x500: 3x 580mm lead screws
  1. 1x bed_arm_right_3.1 Printed Part
    • 1x bed_arm_right_3.1 Printed Part

    • 1x bed_arm_left_3.1 Printed Part

    • 4x M3x12 Countersink Screw

    • 4x 3x35mm Dowel Pin

    • 2x Neodymium Magnet

    • 4x M3 Nylon Locking Hex Nut

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 19

Past 7 Days: 123

Past 30 Days: 507

All Time: 45,588