You're viewing a previously published revision of this guide.  View latest revision

Older
Jun 17, 2022 - 04:06:29
Jun 25, 2022 - 03:06:07 Jun 21, 2022 - 05:06:15 Jun 20, 2022 - 06:06:36 Jun 19, 2022 - 09:06:40 Jun 19, 2022 - 09:06:58 Jun 19, 2022 - 08:06:38 Jun 19, 2022 - 08:06:43 Jun 19, 2022 - 08:06:25 Jun 19, 2022 - 08:06:25 Jun 19, 2022 - 08:06:57 Jun 17, 2022 - 08:06:59 Jun 17, 2022 - 08:06:43 Jun 17, 2022 - 08:06:44 Jun 17, 2022 - 07:06:35 Jun 17, 2022 - 07:06:33 Jun 17, 2022 - 07:06:56 Jun 17, 2022 - 07:06:42 Jun 17, 2022 - 06:06:24 Jun 17, 2022 - 06:06:10 Jun 17, 2022 - 06:06:55 Jun 17, 2022 - 06:06:34 Jun 17, 2022 - 05:06:38 Jun 17, 2022 - 05:06:42 Jun 17, 2022 - 05:06:43 Jun 17, 2022 - 05:06:54 Jun 17, 2022 - 05:06:44 Jun 17, 2022 - 05:06:03 Jun 17, 2022 - 04:06:27 Jun 17, 2022 - 04:06:20 Jun 17, 2022 - 04:06:25 Jun 17, 2022 - 04:06:48 Jun 17, 2022 - 04:06:01 Jun 17, 2022 - 04:06:31 Jun 17, 2022 - 04:06:28 Jun 17, 2022 - 04:06:24 Jun 17, 2022 - 04:06:25 Jun 17, 2022 - 04:06:29 Jun 17, 2022 - 04:06:15 Jun 17, 2022 - 04:06:15 Jun 17, 2022 - 03:06:27 Jun 17, 2022 - 03:06:26 Jun 17, 2022 - 03:06:59 Jun 17, 2022 - 03:06:12 Jun 17, 2022 - 03:06:33 Jun 17, 2022 - 03:06:26 Jun 17, 2022 - 03:06:20 Jun 17, 2022 - 03:06:19 Jun 17, 2022 - 01:06:56 Jun 17, 2022 - 01:06:02 Jun 17, 2022 - 01:06:00 Jun 16, 2022 - 04:06:43 Jun 16, 2022 - 04:06:26 Jun 16, 2022 - 04:06:00 Jun 16, 2022 - 04:06:01 Jun 16, 2022 - 04:06:16 Jun 16, 2022 - 04:06:14 Jun 16, 2022 - 04:06:04 Jun 16, 2022 - 04:06:34 Jun 16, 2022 - 04:06:29 Jun 16, 2022 - 04:06:22 Jun 16, 2022 - 04:06:18 Jun 16, 2022 - 04:06:14 Jun 16, 2022 - 04:06:07 Jun 16, 2022 - 04:06:55 Jun 16, 2022 - 04:06:50 Jun 16, 2022 - 04:06:44 Jun 16, 2022 - 04:06:38 Jun 16, 2022 - 04:06:31 Jun 16, 2022 - 04:06:29 Jun 16, 2022 - 04:06:35 Jun 16, 2022 - 04:06:58 Jun 16, 2022 - 04:06:31 Jun 16, 2022 - 04:06:47 Jun 16, 2022 - 04:06:45 Jun 16, 2022 - 04:06:27 Jun 16, 2022 - 04:06:57 Jun 16, 2022 - 04:06:39 Jun 16, 2022 - 04:06:57 Jun 16, 2022 - 04:06:11 Jun 16, 2022 - 04:06:17 Jun 16, 2022 - 03:06:19 Jun 16, 2022 - 03:06:09 Jun 08, 2022 - 12:06:52 Jun 08, 2022 - 12:06:20
Newer

07. Bed Arm Assemblies

Written By: Simon Davie
  • Comments: 21
  • Favorites: 0
  • Completions: 30

Steps

29

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

Introduction

Please note: The lead screw measurements provided in this guide are based upon building a 300x300 V-Core 3.

If you are building a machine of a different size, please refer to the following list for the correct lead screw length for your machine:

  • 200x200: 3x 280mm lead screws
  • 300x300: 3x 380mm lead screws
  • 400x400: 3x 480mm lead screws
  • 500x500: 3x 580mm lead screws

  1. 1x bed_arm_right_3.1 Printed Part

    • 1x bed_arm_right_3.1 Printed Part

    • 1x bed_arm_left_3.1 Printed Part

    • 4x M3x12 Countersink Screw

    • 4x 3x35mm Dowel Pin

    • 2x Neodymium Magnet

    • 4x M3 Nylon Locking Hex Nut

  2. bed_arm_left_3.1 Printed Part bed_arm_right_3.1 Printed Part 3x35mm Dowel Pin

    • bed_arm_left_3.1 Printed Part

    • bed_arm_right_3.1 Printed Part

    • 3x35mm Dowel Pin

    • Insert two dowel pins into each arm as shown

    • Please note: The dowel pins are quite a tight fit. It is recommended to use a pair of pliers to install them by twisting each pin in the same manner you would install a screw

    • Do not use excessive force to install the pins as this can cause damage to the printed part

  3. bed_arm_left_3.1 Printed Part bed_arm_right_3.1 Printed Part M3 Nylon Locking Hex Nut

    • bed_arm_left_3.1 Printed Part

    • bed_arm_right_3.1 Printed Part

    • M3 Nylon Locking Hex Nut

    • Insert an M3 nut into each marked position

  5. 3x TR8x4 POM Lead screw Nut

    • 3x TR8x4 POM Lead screw Nut

    • 3x Rat Rig Bi-Material Lead Screw Decoupler

    • 12x M3x8 Cap Head Screw

  8. 2x 3x35mm Dowel Pin

    • 2x 3x35mm Dowel Pin

    • 2x M3x12 Countersink Screw

    • 2x M3x35 Cap Head Screw

    • 4x M3 Nylon Locking Hex Nut

    • 1x Neodymium Magnet

    • 1x bed_arm_rear_3.1 Printed Part

    • 1x bed_cable_relief_3.1 Printed Part

  20. 1x lead_screw_constraint_rear_3.1 Printed Part

    • 1x lead_screw_constraint_rear_3.1 Printed Part

    • 6x M6x12 Cap Head Screw

    • 6x 3030 Drop-in T-Nut - M6

    • 1x lead_screw_constraint_front_left_3.1 Printed Part

    • 1x lead_screw_constraint_front_right_3.1 Printed Part

    • 3x F688ZZ Ball Bearing

Author

Simon Davie

Member since: 8/5/21

27,210 Reputation

56 Guides authored

View Statistics:

Past 24 Hours: 22

Past 7 Days: 123

Past 30 Days: 491

All Time: 45,519