1.9. Drag Chain Assembly

Written By: Rat Rig (and one other contributor)
  • Comments: 0
  • Favorites: 0

Steps

4

Sections

1

Flags

0

  1. X Drag Chain. Will be roughly 200mm longer than your X Axis. Cap Head Screw M4x8mm

    • X Drag Chain. Will be roughly 200mm longer than your X Axis.

    • Cap Head Screw M4x8mm

    • Drop-in T-Nut M4. Screw into position, but don't tighten yet.

    • Cap Head Screw M4x25mm

    • Drag Chain Printed Part

    • Hex Locking Nut M4

    • Cap Head Screw M5x50mm

    Edit

  2. Y Drag Chain. Will be roughly 200mm longer than your Y axis. Hex Locking Nut M4

    • Y Drag Chain. Will be roughly 200mm longer than your Y axis.

    • Hex Locking Nut M4

    • Drop-in T-Nut M5. Screw them into position, but don't tighten yet.

    • Drag Chain Printed Part.

    • Cap Head Screw M5x40mm

    • Cap Head Screw M4x20mm

    Edit

  3. Hex Locking Nut M5 Fit the Drop-in T-Nut inside the 2020 profile slot and tighten the screw.

    • Hex Locking Nut M5

    • Fit the Drop-in T-Nut inside the 2020 profile slot and tighten the screw.

    Edit

  4. Cap Head Screw M5x55mm

    • Cap Head Screw M5x55mm

    • Fit the Drop-in T-Nuts inside the 2080 profile slots and tighten the screws.

    • Wiring Diagrams

    Edit
Finish Line

Author

with 1 other contributor

Rat Rig

Member since: 07/10/2020

33,463 Reputation

89 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 3

All Time: 601