Changes to Step #4

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Optional Printed Parts
[* 2] ***Accessories Pack*** - Endcaps, Z tops, MGN rail caps
[* 6] ***Electronics Below Bed Pack*** - Optional setup where the user can mount all the electronics under the printer bed instead of behind or on top. This pack includes the tall feet, side panels for inlets, fans, as well as cable tunels.
- [* 10] Note: This setup needs a 3mm acrylic panel to mount your electronics, and it is not included. The [https://rb.gy/s5xjkn|DXF for the acrylic panel can be found here] so you can get it cut locally.
+ [* 10] Note: This setup requires a 3mm acrylic panel to mount your electronics, and it is not included. The [https://rb.gy/s5xjkn|DXF for the acrylic panel can be found here] so you can get it cut locally.