Changes to Step #13

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Flex Plate
[* 1] [https://www.ratrig.com/primacreator-flexplate-set-pei-310-x-310-mm.html|PrimaCreator FlexPlate Set - Powder Coated PEI 310 x 310 mm]
-[* 10] While a Flex Plate is not mandatory, it really makes your job far easier removing your prints from your printing surface. Highly recommended!
+[* 10] While a Flex Plate is not mandatory, it really makes the job of removing prints from your printing surface far easier. Highly recommended!