Skip to main content

Changes to Step #6

Edit by Rat Rig

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Prepare the top and bottom of the frame - Part 1
[* 2] 500mm 3060 Extrusion
[* 3] 500mm 3030 Extrusion
[* 4] Hidden three way corner assembly
[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws.
[* 5] Tighten the M6x8 set screws.
+[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner.