Changes to Step #7

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Prepare the top and bottom of the frame - Part 2
[* 2] Install one hidden three way corner assembly into the position shown. Tighten the M6x8 set screw to secure them.
+[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner.
[* 3] 500mm 3060 Extrusion
[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws.
[* 4] V-Hive Enclosure Bottom/Top Panel
[* 5] Slide the Panel into the 3060 extrusions slots.