| | [title] Prepare the top and bottom of the frame - Part 4 |
|---|
| | [* 2] 500mm 3030 Extrusion |
|---|
| | [* 3] 2x Hidden Three Way Corner Assembly |
|---|
| | [* 10] Insert the hidden three way corner assembly into the 3030 extrusion fist, then place them on the previous assembly. |
|---|
| | [* 4] Measure both of the distances shown using a long ruler (preferred), or a tape measure. The measurements should be equal to each other. |
|---|
| | [* 9] If the measurements are not equal, double check all corners are square and then check again. |
|---|
| | [* 10] Go back to step 1 and build another assembly for the top of the V-Hive Enclosure. |
|---|