Skip to main content

Changes to Step #12

Edit by Rat Rig

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Place the top frame square
[* 2] Assembly with the vertical extrusions
[* 3] Frame square assembly.
[* 4] Tigthen the M6x8 set screws.
[* 9] Ensure the corner assemblies are flush and square with the ends of the extrusions after tightening the screws.
[* 5] Repeat for all 4 corners.
+[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner.