Changes to Step #6

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the base frame - Part 1
[* 2] Middle Assembly from the previous step
-[* 3] 2x Assemblies from step 2
+[* 3] Front & Rear Assemblies from ***Step 2***
[* 4] Position the three assemblies as shown
[* 5] Ensure that the ends of all three 4080 extrusions are aligned
[* 6] Tighten the marked M8 cap head screws to secure the extrusions together