| | [* 3] Position the 4040 extruded corner assembly in the middle of the extrusion gap as shown |
|---|
| | [* 4] The displayed measurement should be: |
|---|
| | [* 10] 202mm for StrongHold ONE 750x750 |
|---|
| | [* 10] 327mm for StrongHold ONE 750x1250 or 1250x1250 |
|---|
| | [* 5] Ensure that the top of the extruded corner assembly is flush with the top of the 4040 extrusions. |
|---|
| | [* 6] Fully tighten the M8 cap head screw to secure the extruded corner assembly to the frame |
|---|
| | [* 7] Repeat the above instructions for the remaining 3 extruded corner assemblies |
|---|