Changes to Step #26

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Insert Lead Screw
+[title] Install the Y-Axis Lead Screw - Part 1
+[* 9] While performing this step, make sure to support the Lead Screw to prevent it from bending
[* 2] Lead Screw
-[* 3] Insert the Lead Screw from the back of the assembly into the Ball Bearing hole.
+[* 3] Insert the Lead Screw from the back of the assembly through the hole in the ball bearing
[* 4] Precision Shim 12x8x1mm
- [* 10] Slide the Precision Shim in to the Lead Screw and push it all the way.
+ [* 10] Slide the Precision Shim on to the Lead Screw.
[* 5] Lock Collar
- [* 10] Slide the Lock Colar into the Lead Screw and push it all the way.
+ [* 10] Slide the Lock Collar on to the Lead Screw.
[* 9] Do not tighten the screw on the Lock Collar yet.