Skip to main content

Changes to Step #27

Edit by Rat Rig

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Screw through the Nut Blocks
-[* 2] Nut Block for TR8 x 8mm
+[title] Install the Y-Axis Lead Screw - Part 2
+[* 2] Nut Block for TR8x8
[* 3] Screw the Lead Screw through both Nut Blocks.
-[* 10] Make sure the M5 Nylon Locking Hex Nuts on the Nut Blocks are facing the assembly.
+[* 10] Make sure the M5 Nylon Locking Hex Nuts on the Nut Blocks are facing the 40120 extrusion