Changes to Step #30

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Attach the Tensioner Nut
[* 2] Thrust Bearing F8-16M
[* 3] Tensioner Nut
-[* 10] Insert the Thrust Bearing and then screw the Tensioning Nut, just a tiny bit, so it holds its position.
+[* 10] Install the Thrust Bearing on to the exposed end of the Lead Screw as shown
+[* 10] Screw the Tensioning Nut on to the end of the lead screw
[* 9] Do not tighten the screw on the Tensioner Nut yet.