Skip to main content

Changes to Step #31

Edit by Rat Rig

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Attach the rear lead screw assembly
+[title] Install the remaining lead screw components
[* 2] Thrust Bearing F8-16M
[* 3] Lock Collar
[* 9] Do not tighten the screw on the Lock Collar yet.
-[* 10] Slide both parts into the Lead Screw and push them all the way.
+[* 10] Slide the Thrust Bearing and Lock Collar on to the Lead Screw as shown.