Skip to main content

Changes to Step #1

Edit by Rat Rig

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Check if your X - Gantry is square
-[* 2] Push the X-Gantry forward
-[* 3] The space between the XY_Joiners to the front plates should be the same.
+[title] Check if the X-axis gantry is square
+[* 2] Push the X-axis gantry forward
+[* 3] The space between the XY Joiners and the front plates should be the same.
[* 10] If the space is equal on both sides, you may skip to the next chapter.
-[* 4] If the space isn't equal and the gantry doesn't sit flush in front, please follow the next steps.
+[* 4] If the space isn't equal and the gantry doesn't sit flush with the front, please follow the next steps.
+[* 11] The bed plate is hidden in this chapter for ease of understanding, there is no need to remove it.