Changes to Step #1

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Check if your X-axis gantry is square
+[title] Check if the X-axis gantry is square
[* 2] Push the X-axis gantry forward
[* 3] The space between the XY Joiners and the front plates should be the same.
[* 10] If the space is equal on both sides, you may skip to the next chapter.
[* 4] If the space isn't equal and the gantry doesn't sit flush with the front, please follow the next steps.