- | [title] Align the X-Gantry |
---|
- | [* 2] Lossen the Y-rail carriage screws a little bit. |
---|
- | [* 3] Adjust the belt tensioning screw in order to equal the gap on both sides. |
---|
- | [* 4] If you loosen the belt tensioning screw, the grantry will move foward, closing the gap. |
---|
- | [* 5] If you tighten the belt tensioning screw, the grantry will move back, enlarging the gap. |
---|
- | [* 6] Adjust both belt tensioning screws until the gap is equal on both sides and the gantry sits flush on the front plates. |
---|
+ | [title] Align the X-axis gantry |
---|
+ | [* 2] Loosen the Y-rail carriage screws slightly |
---|
+ | [* 3] Adjust the belt tensioning screws in order to equalize the gap on both sides |
---|
+ | [* 4] If you loosen the belt tensioning screw, the gantry will move forward, closing the gap |
---|
+ | [* 5] If you tighten the belt tensioning screw, the gantry will move back, enlarging the gap |
---|
+ | [* 6] Adjust both belt tensioning screws until the gap is equal on both sides and the gantry sits flush on the front plates |
---|