Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Realign the Y-rails
+[title] Align the Y-axis linear rails
[* 2] Tighten the carriage screws
-[* 11] Align the Y-rails from the front to the back:
- [* 3] Little by little move the gantry backwards.
- [* 4] Tighten the screw on the rail closest to the carriage as you move it.
- [* 10] Repeat for all screws along the rail.
+[* 11] Align the Y-axis linear rails from the front to the back:
+ [* 3] Little by little move the gantry backwards
+ [* 4] Tighten the screw on the rail closest to the carriage as you move it
+ [* 10] Repeat for all screws along the rail