Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Align the Y-axis linear rails
[* 2] Tighten the carriage screws
-[* 3] Loosen the Y-rail screws slightly
+[* 3] Loosen the screws on one of the Y-axis linear rails slightly
[* 11] Align the Y-axis linear rails from the front to the back:
[* 4] Little by little move the gantry backwards
[* 5] Tighten the screw on the rail closest to the carriage as you move it
[* 10] Repeat for all screws along the rail