Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Prepare the Y linear rail parts
[* 2] 2x 400mm MGN12 Linear Rail
[* 3] 16x M3x12 Cap Head Screw
[* 4] 16x 3030 Drop-in T-Nut - M3
+ [* 10] ***V-Core 4 400 -*** 20 Screws + T-nuts
+ [* 10] ***V-Core 4 500 -*** 24 Screws + T-nuts
[* 9] The linear rail carriages are not interchangeable. Do not try to use a carriage on a different linear rail than the one it was supplied with.