Changes to Step #6
Step Lines
| - | [title] Install the Y bumper and linear rail |
|---|---|
| + | [title] Install the Y bumper and linear rail - Part 1 |
| [* 2] Y bumper assembly from the previous step. | |
| [* 3] Make sure the printed part is fully inserted in the frame extrusion's slot, | |
| [* 4] Tighten the M6x12 Cap Head Screw | |
| [* 9] Take care not to over tighten the M6x12 screws as you damage the printed parts | |
| [* 5] 400mm MGN12 Linear Rail Assembly | |
| [* 6] Insert the linear rail into the 3030 extrusion |