Changes to Step #2
Step Lines
| + | [title] Inspect & test the linear rails |
|---|---|
| + | [* 2] With the rail still on the absorbent paper towels, carefully and slowly move the carriage from one end of the rail to the other |
| + | [* 10] The carriage should move smoothly over the entire length of the rail |
| + | [* 9] Small changes in resistance are normal, but the carriage becoming much harder to push, or binding completely are not |
| + | [* 3] Repeat the previous test whilst applying a small amount of force downwards on the carriage |
| + | [* 10] The carriage will likely travel more smoothly when applying a downwards force, this is normal |
| + | [* 9] If the carriage does not move smoothly, or binds completely, refer to the [guide|15|Linear Rail Troubleshooting Guide] |
Image 1
No previous image
Added
Image 2
No previous image
Added