Changes to Step #16

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[title] Install the right stepper motor - Part 2
-[* 3] Tighten the four M6x12 screws to secure the motor_plate assembly to the frame
+[title] Install the lower stepper motor - Part 2
+[* 3] Tighten the four M6x12 screws to secure the motor plate assembly to the frame
[* 9] Take care not to over tighten the M6x12 screws as you can damage the printed parts