Skip to main content

Changes to Step #35

Edit by Rat Rig

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

+[title] Install the upper Y motors - Part 1
[* 2] vc4_dual_motor_spacer
- [* 10] Insert the printed part trought the screws.
+ [* 10] Insert the printed part through the screws.
[* 3] Ensure it sits flush with the top motor plate.
-[* 4] Top Y Stepper motor assembly from step ***XXXX***
+[* 4] Upper right Y motor assembly from ***Step 28***
[* 5] Make sure the assembly is flush with the frame extrusion before proceeding.