Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the left joiner - Part 2
[* 2] Aluminium Spacer 5x8x14mm
[* 10] Insert one Aluminium spacer on each screw
[* 3] vc4_x_endstop printed part
- [* 10] Align the printed part and insert though the aluminium spacers.
+ [* 10] Align the printed part and insert it through the aluminium spacers.
[* 4] vc4_xy_joiner_middle plate
- [* 10] Align the plate and insert though the aluminium spacers.
+ [* 10] Align the plate and insert it through the screws.