Changes to Step #7

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Assemble the left joiner - Part 4
+[* 2] Insert two T-Nut Square type for 2020 on the top slot.
+[* 3] Insert one T-Nut Square type for 2020 on the lower slot.
+[* 4] Gently insert the V-Slot 2020 extrusion inside the vc4_xy_spacer. The two square T-nuts must be facing the opening on the printed part, as shown.
+[* 5] Ensure the extrusion and the printed part are flush.