Changes to Step #18
Step Lines
| + | [title] Assemble the right joiner - Part 5 |
|---|---|
| + | [* 2] vc4_xy_joiner_lower plate |
| + | [* 3] 2x M5x8 Cap Head Screw |
| + | [* 10] Insert the screws through the plate, and tighten them to the t-nuts on the 2020 extrusion. |
| + | [* 4] M5 Hex Locking nut |
| + | [* 10] Thread a M5 hex locking nut in each screw |
| + | [* 5] Tighten the screws in each the M5 hex locking nuts were inserted |
| + | [* 9] Do not overtighten the screws and too much force can cause the gantry to bind when installed on the V-Core 4. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added