Changes to Step #19

Edit by dozuki@jantec.xyz —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the right joiner - Part 6
[* 2] vc4_xy_trim_left printed part
-[* 3] 4x M4x8 Cap Head Screw
+[* 3] 4x M3x8 Cap Head Screw
[* 10] Insert the screws through the printed part and tighten them to the plate
[* 11] Set the assembly aside, it will be used further in the Guide