Changes to Step #26

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Install the x-axis assembly - Part 2
+[* 2] M3x8 Cap Head Screw
+[* 3] M3 washer
+ [* 10] Insert an M3x8 Cap Head screw with an M3 washer thought the joiner plate and tighten it to the linear rail carriage
+ [* 9] Don't overtighten the screws as it can cause the gantry to bind in the Y direction