Changes to Step #26

Edit by MoJo —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Install the x-axis assembly - Part 2
-[* 2] 4x M3x8 Cap Head Screw
+[* 2] 4x M3x8 Cap Head Screw with threadlock (blue on ends of screw threads)
[* 3] 4x M3 washer
[* 10] Insert an M3x8 Cap Head screw with an M3 washer through the joiner plate and tighten it to the linear rail carriage
[* 9] Don't overtighten the screws as it can cause the gantry to bind in the Y direction