Changes to Step #27

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Install the x-axis assembly - Part 3
[* 2] 4x M3x8 Cap Head Screw
[* 3] 4x M3 washer
- [* 10] Insert an M3x8 Cap Head screw with an M3 washer thought the joiner plate and tighten it to the linear rail carriage
+ [* 10] Insert an M3x8 Cap Head screw with an M3 washer through the joiner plate and tighten it to the linear rail carriage
[* 9] Don't overtighten the screws as it can cause the gantry to bind in the Y direction