Changes to Step #33
Step Lines
| + | [title] Route the top CoreXY belt |
|---|---|
| + | [* 10] Take one end of the top CoreXY belt, and feed it as shown: |
| + | [* 2] Feed the belt through the left stepper motor bearing stacks. |
| + | [* 4] Feed the belt behind the left xy_joiner, through the front tensioner and finally the front bearing stack on the xy_joiner. |
| + | [* 10] Take the other end of the top CoreXY belt, and feed it as shown: |
| + | [* 3] Feed the belt through the right stepper motor bearing stacks. |
| + | [* 5] Feed the belt around the rear bearing stack on the xy_joiner. |
Image 1
No previous image
Added
Image 2
No previous image
Added