| | [title] Route the top CoreXY belt |
|---|
| | [* 10] ***Ensure the belt teeth are facing the stepper motor pulleys.*** |
|---|
| | [* 10] Take one end of the top CoreXY belt, and feed it as shown: |
|---|
| | [* 2] Feed the belt through the left stepper motor bearing stacks. |
|---|
| | [* 4] Feed the belt behind the left xy_joiner, through the front tensioner and finally the front bearing stack on the xy_joiner. |
|---|
| | [* 10] Take the other end of the top CoreXY belt, and feed it as shown: |
|---|
| | [* 3] Feed the belt through the right stepper motor bearing stacks. |
|---|
| | [* 5] Feed the belt around the rear bearing stack on the xy_joiner. |
|---|