Changes to Step #34

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Route the lower CoreXY belt
-[* 10] Take one end of the lower CoreXY belt, and feed it as shown:
+[* 11] ***Ensure the belt teeth are facing the stepper motor pulleys.***
+[* 10] Ensure the belt teeth are facing the stepper motor pulleysTake one end of the lower CoreXY belt, and feed it as shown:
[* 2] Feed the belt through the left stepper motor bearing stacks.
[* 4] Feed the belt around the rear bearing stack on the xy_joiner.
[* 10] Take the other end of the top CoreXY belt, and feed it as shown:
[* 3] Feed the belt through the right stepper motor bearing stacks.
[* 5] Feed the belt behind the left xy_joiner, through the front tensioner and finally the front bearing stack on the xy_joiner.