Changes to Step #21
Step Lines
| + | [title] Remove the second carriage |
|---|---|
| + | [* 11] ONLY remove the second carriage if you are not assembling the IDEX variant. |
| + | [* 2] Align the mgn12c carriage mount with the linear rail. |
| + | [* 3] Slowly slide one carriage to the mount |
| + | [* 4] Carefully store the carriage, this will be essential for the IDEX upgrade. |
| + | [* 9] Ensure the carriage never leaves the mount, to avoid loosing any of the ball bearings inside. |
Image 1
No previous image
Added
Image 2
No previous image
Added