Changes to Step #1
Step Lines
| + | [title] Prepare your control board |
|---|---|
| + | [* 2] BIGTREETECH Octopus V1.1 |
| + | [* 3] Raspberry Pi - Any model |
| + | [* 4] USB A to USB C Cable |
| + | [* 5] 5V Power supply - smartphone charger for example (minimum 3 AMP is recommended) |
| + | [* 10] It is heavily recommended that you flash your board and make sure it is detected in the configurator before you plug in your stepper drivers and start connecting your wiring. - [link|https://os.ratrig.com/docs/installation|Check RatOs documentation] |
| + | [* 6] Remove the highlighted jumper as it will no longer be required. |
| + | [* 11] If your board flashed successfully you can proceed with the guide. |
Image 1
No previous image
Added
Image 2
No previous image
Added