Changes to Step #5
Step Lines
| - | [title] Remove the following components |
|---|---|
| + | [title] Remove the following components - Part 1 |
| [* 2] Remove the two M3x8 Cap Head Screws | |
| [* 3] Remove the Orbiter V2 | |
| [* 4] Remove the PTFE tube | |
| [* 5] Remove the M3x16 Cap Head Screws and the toolhead shroud | |
| [* 7] Remove the 40x10mm axial fan | |
| [* 8] Remove the endstop and M3x 6 Cap Head Screws | |
| [* 10] Store the Orbiter, 40x10mm axial fan and the endstop aside, it will be needed later in the guide |