Changes to Step #6

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

+[title] Remove the following components - Part 2
[* 2] Remove the four M2.5x6 Countersink Screw
[* 3] Remove the Rapido hotend
[* 4] Remove the two M3x40 Countersink Screw
[* 5] Remove the two M3x35 Cap Head Screw
[* 6] Remove the Rat Rig toolhead fan grille printed part
[* 7] Remove the Rat Rig toolhead front printed part