Changes to Step #5
Step Lines
| + | [title] Prepare the X-Endstop cable |
|---|---|
| + | [* 2] Cable 120mm - 3 Conductor 24AWG - JST XH2.54 male to Bare wire |
| + | [* 3] Micro JST 5pins provided with the EBB42 Toolboard package |
| + | [* 10] Crimp the connector on the 3 wires as shown. |
| + | [* 4] Refer to this picture to clearly show where the wires go |
Image 1
No previous image
Added
Image 2
No previous image
Added