Changes to Step #8
Step Lines
| + | [title] Prepare the 4028 cooling fan wires - Part 1 |
|---|---|
| + | [* 3] Crimp the Connector - Molex Micro-Fit (43025 compatible) to all the 4028 wires |
| + | [* 5] The small tab must be facing upwards. |
| + | [* 10] Insert the crimps inside the Connector - Molex Micro-Fit - 4 Pin - Male (43025-0400) as shown |
| + | [* 2] 1 - 12V ''Red - NIDEC fan'' |
| + | [* 1] 2- GND ''Black - NIDEC fan'' |
| + | [* 7] 3- PWM ''Blue - NIDEC fan'' |
| + | [* 4] 4- Tac ''White -NIDEC fan'' (not used with the Octopus board( |
| + | [* 10] Insert the crimp on the connector until you hear a "Click" |
Image 1
No previous image
Added
Image 2
No previous image
Added