Changes to Step #10
Step Lines
| + | [title] Prepare the 4028 cooling fan wires - Part 3 |
|---|---|
| + | [* 2] Use the full length of the RED and Black wires |
| + | [* 3] 2 Pin - JST XHP-2 - 2.54 Male |
| + | [* 4] Crimp the GND (Black) wire to the left slot on the housing |
| + | [* 5] Crimp the +12V (RED) wire to the left slot on the housing |
| + | [* 6] Cut the white wire with 70mm, measuring from the Molex connector |
| + | [* 7] 2 Pin - JST XHP-2 - 2.54 Male |
| + | [* 8] Crimp the PWM (White) wire to the left slot on the housing |
| + | [* 1] Triple check all connections and crimps |
Image 1
No previous image
Added
Image 2
No previous image
Added