Changes to Step #12

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

+[title] Prepare the EBB42 Power cable
+[* 2] The power connector provided in the EBB42 toolboard box
+ [* 9] Carefully check the wire order, if the polarity is swapped, you will destroy your electronics!
+ [* 10] Crimp the red and black wires on the connector as shown
+[* 3] Wire - DC Power - 18AWG RED - 1000mm
+[* 4] Wire - DC Power - 18AWG BLACK - 1000mm
+[* 5] 2x Fork Terminal - 3.7mm Insulated
+ [* 10] Crimp the fork connectors as shown

Image 1

No previous image

New image

Added