Changes to Step #19
Step Lines
| + | [title] Install the Octopus board mounts |
|---|---|
| + | [* 2] 2x vc4_adapter_octopus assembly |
| + | [* 3] M3x6 Countersink Screw |
| + | [* 10] Insert the M3x6 Countersink Screws from the bottom, into the designated holes, and secure the assemblies to the enclosure. |
| + | [* 9] Take care not to over-tighten the screws as you can damage the printed parts |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added