Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Y Front plate
-[* 1] Insert wisdom here
+[* 2] Mill front Y plate
+[* 3] 3x M12x25 Countersink screws
+[* 4] Both plates must be facing upwards.
+[* 5] Ensure the bearing groove is facing towards the T-Slot extrusion.
+[* 7] On the Mill front Y plate side:
+ [* 8] Install the two 40-series brackets.